Bypass for RAFTEC collector unit

The bypass is made of brass by the method of hot forming and covered with nickel. The unit consists of tees connected by a copper chrome tube. The connection of all elements of the unit to each other is made on rubber sealing rings, which allows to refuse the use of additional seals. Bypasses are compatible with collector units of series: RCO03-12, LCR-1.2-1.10.

Modifications

➠

	Sku	Diameter	Size	Nom. pressure	Oper.temperature	Indiv.pack	General pack
	MB-481	1/2"	210 mm	0,25kPa	до 110С	1pcs	30pcs

Description

Bypasses with a bleed-off valve are units of devices that are connected to collectors to redirect the flow of the coolant to the return collector in the event that the flow through collector loops decreases below a set value. This allows to preserve the hydraulic characteristics of the system regardless of the position of collector loops controls (manual, thermostatic valves, etc.), to protect the pump from working "on a closed valve";.

The gate valve gradually opens after the differential pressure value of the fixed setting is reached. Thus, recirculation is carried out, which is proportional to the close of electrothermal valves, and maintains a constant differential pressure of the collector circuit. Fixed pressure drop setting is 25 kPa (0.25 bar).

Specifications

Body material:	Brass
Gland seal:	EPDM
Thread type of connecting nozzles:	M-M
Thread of connecting nozzles:	1/2"
Installation length of pump, mm:	130
Range of pressure drop setting value, Kpa:	0,25